How to Identify What Parts Go To Your Spa.

Go Back

For Pump/Motors With This Topside

 +
This is the Pressure Switch Balboa originally used. They wanted a smaller diameter switch so changed to below. We STILL recommend this switch. It has shown better service that the replacement. You have to make sure that there is a gap between the switch and the board. Typically you turn the heater toward you and create the gap. Then you have a switch that will last and is easy to adjust.

If you have 1 Pump System, Use Part # 2000-064

If you have 2 Pump System, Use Part Spas Used the 1lb Switch, Part # 2000-065:

1 lb Switch 2000-064 Click Here For Switches
2 lb Switch 2000-065
This is the Pressure Switch Balboa changed to later in production. They wanted a smaller diameter switch so changed to this.

 
 
 
 
 
Copyright © 2009-10 Clear Creek Spa Service
Jacuzzi® is a registered trademark of Jacuzzi Inc. -  Jacuzzi Premium is a registered trademark
All Rights Reserved