|
|
 |
|
 |
If you don't find what you are looking for,
Click Here for MORE Generic Piping Parts
If you have leaks, Click Here |
|
Jacuzzi® Patented Jets:
Below you will see the most common jet assemblies used in Jacuzzi Whirlpool Spas.
These assemblies are as shown and do NOT include nut, leveling ring, or
connecting fittings. If the jet or piping at the jet is damaged, you have to remove the complete
jet and replumb the new jet with PVC glue. Some plumbing parts are standard
PVC plastic parts you can purchase from any hardware store. Others are
specific to spas. Go to: Plastic Spa Fittings for
spa specific parts. Also, check below for nozzle and parts. |
| All Jet Housings
for SPAS Were Originally Gray
|
|
We Also Offer Colors
Similar to What Yours Might Look Like Now |
|
White |
Oyster |
Almond |
Gray/Silver |
 |
 |
 |
 |
|
|
|
|
Plumbing Parts for Jet Assembly Above: |
 |
2540-025-P1-026 |
| Airline to Jet |
| 1/2 X 3/8" 90 |
| Glues to
inside 1/2" air line socket on jet housing. |
|
$1.99 |
|
 |
2000-050-P2-050 |
| Waterline to
Jet |
| 3/4"
90 |
| Glues to
3/4" outside water fitting on jet housing. |
|
$1.99 |
|
 |
2000-051-P2-088 |
| Waterline
To Jet |
| 3/4" T |
| Glues to
3/4" outside water fitting on jet housing. |
|
$2.49 |
|
 |
BMH Jet-- No Leveling Ring Used |
|
1836/J25-836 |
AMH and HTC Leveling Ring
|
$1.89 |
|
|
2540-332/J23-102 |
HTA Leveling Ring |
$3.24 |
|
 |
2000-100/J20-99-103 |
BMH Nut |
$.69 |
|
|
1835/J25-835 |
AMH and HTC Nut |
$3.69 |
|
|
2540-331/J23-103 |
HTA Nut |
$3.69 |
|
|
|
|
|
Jacuzzi®
Jet Assembly Nozzles Only:
|
|
NOTE: If your find your spa leaking at the air control, its most
likely the jet nozzle.
This is the strangest thing that happens. What can happen is the
jet nozzle fails to create a suction at the back of the jet housing and this
forces water UP the air line instead of sucking air down the line. To correct, you need to replace the nozzle.
Usually all you have to do is remove the old nozzle and install the new. You
can reuse the gasket, screws, and retaining ring. We do offer retaining ring
and gasket as option but they are not normally replaced. |
|
|
|
|
|
| |
|
|
|
|
Generic Jets Used by Jacuzzi Late Production |
|
Micro Magna 04/12/01 to 06/15/01 |
 |
| #1 Jet Face
(shown) |
#1 Jet Face (spinning) |
Housing
Assembly for this Jet |
|
2 5/8" face, 1 1/2" long. |
61-354A |
| 61-356 |
61-359 |
| $11.90 |
$13.25 |
$14.80 |
|
|
|
|
|
|
|
Mini Swirl 06/18/01 to End of
Production of JWB Spas |
 |
 |
 |
| Jet Face; Swirl |
Jet Face; Directional |
Housing
Assembly |
|
3" face, 3 1/4" long. |
|
| 309111-67 |
309110-67 |
6540-341+ |
| $9.90 |
$9.90 |
$14.90 |
|
|
|
|
|
| |
|
|
|
|
NECK JET FOR Z-255 and
Retro Replacement |
|
GooseNeck Jet |
|
Housing
and Fitting Complete |
| As
Shown; Either Jet |
|
|
Tired Of Replacing Neck Jet? This smaller nozzle will go
into same fitting and no longer stick out. This will be flush
against the wall of the spa with the nozzle able to direct flow
downward. |
|
NOTE: The
downward pointing of the jet nozzle is limited due to
design constraints. Make sure the direction valve is
pointed away from the neckjet when not in use. |
|
|
 |
|
 |
|
2000-657 |
60-660,1,2,3 |
Neck Jet Conversion |
|
$25.25 |
$14.20 |
$5.99 |
|
|
|
|
|
| |
|
|
|
|
Z-235 AND Z-255
JETS |
 |
 |
 |
|
60-652 |
60-646 |
60-647 |
|
$24.99 |
$23.05 |
$30.00 |
|
|
|
|
|
| |
|
|
|
| |
|
If your jets look like any of the following,
Click Here |
 |
 |
 |
|
| |
|
|
|
| |
|
| |
|
| |
|
|
Copyright © 2009-10 Clear Creek Spa
Service, B Bouman and Co LLC
Jacuzzi® is a registered
trademark of Jacuzzi Inc. - Jacuzzi Premium is a
registered trademark
All Rights Reserved
|
