See Jacuzzi Brand Plumbing Parts If You Don't See What You Want Here

Want a "Magic" Something to Help You Repair a Broken Piece of Plastic? Click Here

 

Plumbing Piping: Assorted Applications
DISCHARGE Manifold Fittings (all barbs ¾")  See Help Installing at Click Here
79-860 6540-314-79 6540-315-79 6540-788-79 6540-316-79 2540-051-78 2540-091 79-860
PLUG: Use to Plug Barb Ports on Right. This is a SPECIALIZE fitting. 2" 4 Port Open 2" 4 Port Closed 2" 6 Port Open 2" 2 Port Closed 1 ½" 4 Port Open 1 ½" 8 Port Open PLUG: Use to Plug Barb Ports on Left. This is a SPECIALIZE fitting.
1.49 9.69 10.90 10.69 7.83 9.50 Discontinued

Buy Two 4 Ports to Left to equal one 8 Port.

 1.49







 

AIR LINE Manifold Fittings (air lines to air control)  See Help Installing at Click Here
6540-077-79 2540-090-78 6540-780-79 6540-781-79
3/8" barb X 1 3/8" barb X 1" 3/8" barb X 1" 3/8" X 1.5"
6.06 7.50 7.50 9.90

Discontinued


Common Fittings Needed for Above Air Manifold
Reducing Fitting
Cap
Note: 2540-090 and 6540-780 may come with several plugs on the manifold as shown.
 
P3-062 P3-115 79-101  
Reduce Bushing 1"to1/2" 1" Cap 3/8" Barb Plug  
$.49 $1.89 .49  



 

 
 
Fittings At the Jet
P1-020 B1-010 B2-110 B2-120 B2-150 B2-152
Piping to Jet Airline to Jet Waterline to Jet Waterline To Jet Straight Fitting 90 Elbow
1/2" Adaptor 1/2 X 3/8" 90 3/4" 90 3/4" T 3/4" Barb with 1/2" Glue 3/4" Barb with 1/2" Glue
Glues to 1/2 fitting to mount flex and rigid hose to pipe. Glues to inside 1/2" air line socket on jet housing. Glues to 3/4" outside water fitting on jet housing. Glues to inside 1/2" water line inside housing.
1.08 2.25 2.39 2.79 1.99 1.99






   
 

Assorted Plumbing Parts

This valve replaces older cycle valve. It is about 1/2 the size. It also has 1" instead of 1 1/2" fittings. Lastly the plumbing connects in different location then older generation. Jacuzzi recommends replacing the cycle valve with a manifold and removing the cycle feature to avoid future repairs.

See Here
3 Way Valve Generic Replacement Handle and Base ONLY for 3 Way Valve to left. 2" Slice Valve 2" Swing Check Valve w/rubber hinge door (normal for water applications) 2" Check Valve w/spring door (normal for air blower applications) 6 Port Cycle Valve Union for J-Pump
2540-305 31-4300-Gray 78-1020 78-378 78-821 2000-120 2000-170

$26.00

 $8.49 $22.90 $31.12 $33.00 $250.00 $15.75







   
 
Heater Repair Parts
Heater Coupling Repair Kit Heater Tailpiece Only

19-421a 19-005
$14.90 $5.90


   
 

Hose; Flex

Flex Hose: PVC piping you can bend. Uses same PVC primer and glue as rigid piping.
Comes in a per foot lengths up to 5'
Enter Length in Box and Add to Cart.

 NOTE: Due to length constraints we cut longer orders into 5' or less lengths.
P1-H100 P2-H100 P3-H100 P5-H100 P6-H100
½" ¾" 1" 1 ½" 2"
$2.00ft $3.10ft $3.60ft $4.00ft $5.00ft





Max Length 10' Max Length 10' Max Length 10' Max Length 5' Max Length 5'

 

Pipe Extender Magic Mender
This Pipe Mender goes INSIDE the existing pipe and continues the same size pipe but adds length.
½" ¾" 1" 1 ½" 2"
P1-005 P2-005 P3-005 P5-005 P6-005
$6.50 $8.95 $10.85 $14.90 $16.90





Coupling Extender Magic Mender
Actual Example of Application; Click Here
This Fitting Mender goes OVER the existing pipe coupling and creates same size pipe. Can be used to go over most couplings.
1 ½" 2"
P5-429 P6-429
$15.99 $15.99


Inside Pipe Repair Magic Mender
This Fitting Mender goes INSIDE BOTH existing pipes and creates an inside mending. BOTH pipes must be same size.

 
1 ½" 2"
P5-500 P6-500
$5.65 $5.65


 
 

Barb Fittings
B1-010 1/2 X 3/8" 90 Glues to inside 1/2" air line socket on jet housing. $2.25
B2-010 3/4"X3/8" 90 Glues into 3/4" fitting to attach 3/4" Hoes $2.45
B2-110 3/4" 90 Waterline to Jet $2.39
B2-120 3/4" T Waterline To Jet $2.79
B2-150 3/4" Barb with 1/2" Fitting Straight Fitting $1.99
B2-152 3/4" Barb with 1/2" Fitting 90 Elbow $1.99
B2-154 3/4"slipX3/4"barb Glue into 3/4" fitting and connect 3/4" hose $2.49
B3-245 1"slipX3/4"barb Glues into 1" fitting and connect 3/4" hose $3.12
B3-250 1"slipX1"barb Glues into 1" fitting and connect 1" hose $3.40
           

 
 

MORE HELP:

Typical Discharge Assembly
JWB Spas with 2 Pumps and 2" Piping (you have to install several reducing fittings to match the 1.5" manifold to the 2" piping.)
A Connect 2" pipe to new elbox P6-429
B New elbow inserts into new coupling P6-110 + P6-304
C New 4 Port Coupling 2540-051
C New 8 Port Coupling 2540-091
D New Street Elbow P5-111
F Mating 2" heater coupling to 1 1/2" piping. P5-500 + 19-005

2 Pump Diagram Shown. 1 Pump Spas Have no Upper Discharge and Only One Manifold Part.
   
JWB Spas with 2 Pumps and 1 1/2" Piping (Most Common)
B New elbow inserts into new coupling P5-111
C New 4 Port Coupling 2540-051
C New 8 Port Coupling 2540-091
D New Street Elbow P5-111
F Heater Reduce Couplng w/Rdc Fitting P5-304 + 19-005
   

JWB Spas with 1 Pump and 1 1/2" Piping (Most Common)
B Plug P5-112
C 4 Port 2540-051
D New Street Elbow P5-111
F Heater Reduce Couplng w/Rdc Fitting P5-304 + 19-005

 

Typical Airline Assembly

Air Assemblies can be horizontal or vertical (pictured). Parts shown are most common need for repair)
A 1/2" Street Elbow to air control P1-111   
B 1" to 1/2" Reducing Fitting P3-300
C 4 Port Air  Manifold 6540-077
D 1" Cap P3-115
  Air Control Click Here

 

 
 
Copyright © 2006-12 Clear Creek Spa Service - B Bouman and Company LLC
Jacuzzi® is a registered trademark of Jacuzzi Inc. -  Jacuzzi Premium is a registered trademark
All Rights Reserved