You have 2 Brand choices. The Hydroquip Retro System we recommend and the popular Balboa VS Retro system.

See "HELP!" On Bottom Of Page

 

The following kits replace the following topside+control systems+heater

F-105, F-106, F-107, F-108 (a few spas in this generation had an "air blower". For those spas, only the "6200-3-WH-LT" will work.)

 

H-136, H-276

R-574, R-576

 

H-716

 

6200 Series When you want a great system.

Recommended

This system is made by Hydroquip. An excellent choice and the one we recommend.
It fits exactly where your current system fits with the innovative "SLIDE" series heater (as pictured). Whether your existing system has the heater below the control box or behind, this system adjusts for your spa.
The 6200 Series operates on either 120 or 240vac. The 6200 will operate one pump and one secondary component such as a second pump. Or just the one 2 speed pump. The unit will operate components on either 115v or 230v. When purchased, we will prewire the unit to match what you requested. There is also the option of adding a 3 component shown on unit 6200-3-WH-LT below to the right.
It also includes a new mood light cord to change from the AMP you have to the JJ cord you need. Simple to do.
Comes standard with a small topside but you can upgrade to a larger topside.
6200-WH-LT 6200-3-WH-LT
w/large topside and operates 2 components w/large topside and operates 3 components
$594.00 $649.00


 
 9000 Series  When you want the best  

The 9000 series is same as the 6200 except its smarter. Its the Mercedes Benz series.
First, it can operate more components. Up to 3 separate pumps and 2 more components.
Has programmable features such as setting exact times you want filtering to occur.
You can add remote controls such as auxiliary, in house or even portable remotes. (controls are extra and will require installation and additional components.)
We only recommend this unit for those with electrical/electronic experience.
9000-WH-DT
$749.00

 

Balboa VS Spa Control System
Made by Balboa Instruments. An excellent kit that includes the control system, the heater, and electronic topside. The VS501 will operate on either 120vac or 240vac. It can operate one pump and a second item. That second item can either be a second pump or an air blower. But it will only operate TWO pieces of equipment plus the mood light (included) and ozone ready.
If you have a H-136 or H276, you will have to make a small platform for the VS to sit on since the "H" series you have stands on legs. The VS doesn't. So you need to lift the VS up to the elevation your current plumbing is plumbed. (Note: the CS series above do require such a lift since the heater can be adjusted to any level.)
 
VS-501

   For:

 
Balboa VS Spa Control System
1 5/8" X 4 3/8" Outside Diameter Topside
1" X 3 1/2" Cutout
110-120vac Spas can be converted to 220-240vac
2 Speed, 110 or 220 vac, Single Pump System
One extra piece of equipment whether pump or blower.
Ozone Ready
Spa Light Assembly Included
Heater Included
M-7 Leading Edge Technology
One Year Warranty (90 days on heater)
VS501 $538.00

 
VS-510

   For:

3 1/4" X 7 3/8" Outside Diameter Topside
2 1/4" X 6 1/2" Cutout
220-240vac Spas ONLY
#1 Pump Must be 2 Speed, 220-240 vac
#2 Pump Must be Single Speed; 220-240 vac
Blower Ready
Ozone Ready
Spa Light Assembly Included
Heater Included.
M-7 Leading Edge Technology
One Year Warranty (90 days on heater)
VS510 $569.00

 

 

HELP ! ! 

How hard can it be? Click Here to see how I installed a retrofit into a Jacuzzi Alexa Spa. We will be with you until your spa is up and running.

What you will have to do:

Electronic Control Box

a. Removal of old control box

 

b. Removal of old electronic topside

 

What Will This Kit Do For Me?
a. All kits use current circuit board technology.
b. All kits have Digital Temp Readout on the topside.
c. Automatic filter cycles
d. Freeze Protection.
e. Topside Failure Codes
f. Current and future parts availability.

 

Why Would I Want to Retro-fit my Electronic Spa?

This would be simply upfront cost verses long term... especially if you have a discontinued board. These kits replace the topside, pcboard, sensors, heater,  and pressure switch. Individually on many current spas the replacement costs for these parts would total cost to $800. So if you expect to replace a number of parts in the near future, for one low price you can upgrade.  Also, on some model spas you only have a Dial with no Digital Readout like all kits we offerthese.

 

How We Will Help
If you can supply us with digital pictures we will analyze what you will need to do to
your spa to make it ready to retro-fit.
This is where we can help... and it's free.
We can explain what you need to do and how intensive it will be. 
The biggest change may be to install a GFCI.
GFCI means ground fault circuit interrupt. It is mandatory for safety and
code reasons. These can be purchased at hardware stores or installed by a
licensed electrician.
On spas with electronic systems, if properly wired, they already have a gfci
installed. Replacement of this retro-fit into existing electronic systems usually does
not require much change.
Send your photos to bbouman@clearcreekspas.com so we can help. We can
walk you through what you need to do... and it's free.

 

 

*Caution must be taken about matching pumps/blower/ozonators/circ pumps with your existing system. For example, the VS-510S used for a Z-150 will not work out of the box on a Z series with 2 pumps. We include a workaround otherwise you will have error failures. It one of the reasons to buy from us.

    Please contact Bruce at bbouman@clearcreekspas.com to confirm you are ordering the right system and any cautions you need to be aware of.

 

Copyright © 2006-12  Clear Creek Spa Service - B Bouman and Company LLC
Jacuzzi® is a registered trademark of Jacuzzi Inc. -  Jacuzzi Premium is a registered trademark
All Rights Reserved